Publicité
Les langues disponibles
Les langues disponibles
2. Rotate counterclockwise to remove the water valve assembly from
the water tank for cleaning.
3. Pinch the flange of the water tank cover slightly upwards, and the
water tank cover can be separated from the water tank. Remove the
other side with the same method. The tank and its cover can be
cleaned after disassembly.
4. Install the water valve by rotating it clockwise after cleaning. When
installing the tank cover, install the one side at first (do not press it all
the way), then install the other side. Press firmly on edges of the tank
cover to fit the tank. Re-install the entire water tank assembly at 45°to
the door. Press the outer edge of the water tank slightly downwards to
make it fit into the door.
FILL THE TANK WITH PURE DRINK WATER
Open the inlet cover of water tank ①. Slowly fill the tank with pure
drinking water up to the maximum fill line marked with "2L". Then close
the inlet cover ①. To prevent any spills, please use a narrow-bore
container to charge water.
2L MAX
1
Publicité
