Publicité
Les langues disponibles
Les langues disponibles
1. TRANSPORT AND START-UP
When transporting this unit, take it by the base and gently tilt it up to 45 °.
Do not lift the appliance by the door handle. Do not put the unit in a fully
horizontal position or upside down. Push the refrigerator on the
wheeled legs to move it.
Attention : After transporting the refrigerator, you must wait at
least 8 hours before putting it into service.
2. CLEANING THE APPLIANCE:
Clean all parts of the refrigerator with water and a mild detergent
solution. Rinse it thoroughly and dry it with a soft cloth.
Note: The electrical parts of the device can be cleaned only with a dry
cloth.
3. UNPACKING
PACKAGING ELEMENTS
• Remove all packing material around the appliance as
• Cartonboard and sheets of paper are recyclable. They
must be thrown in the collection bins provided for this purpose.
• The materials bearing the symbol
> PE <= polyethylene; > PS <= polystyrene; > PP <=
polypropylene
This means that they can be recycled by depositing them in
appropriate collection containers.
• Other packaging materials (adhesive, fasteners, etc.) should be
disposed of with household waste.
To know more: www.quefairedemesdechets.fr
IV. BEFORE FIRST USE
THE
DEVICE
well as the protective elements inside the appliance
compartments.
AND
DISPOSING
are recyclable::
OF
THE
Publicité
