Renew PLUS BEMIS 7BB1980NL Manuel page 15

OPERATION
(continued)
POWER OFF / ON
• Press STOP for 3 seconds to power off . Press STOP, FRONT, or REAR WASH to
power on .
FACTORY RESET
• To reset the settings to factory default, press STOP on the auxiliary panel for 5
seconds and then unplug cord for 5 seconds . The unit will be turned off and on
automatically and initialized and all presets will be deleted . Plug back in while not
seated on unit .
MUTE
• Press FRONT WASH button for 3 seconds while not being seated on unit to turn
remote touch chimes on or off .
SEAT / REMOTE PAIRING
Consumers do NOT need to pair the remote with the bidet unless there are multiple
bidets in close proximity to each other . After pairing, remote will only be able to
control the seat that it is paired with .
• Press the OSCILLATE button for 3 seconds, then press + or - to set ID from
0 - 3 . Leave remote alone for 5 seconds to complete setting .
AUXILIARY PANEL / SIDE CONTROLS
Backup functionality, in case remote is not working,
batteries run out, or cannot be located .
FRONT
WASH
www.RenewSeats.com
REAR
WASH
STOP
15