AUTO-HAK R17A Guide Rapide page 5

Towbar accessories:
Towing hitch (without electrical set)
R17A
Cat. no.
Class: A50-X
Designed for:
PEUGEOT

806, 5 doors, VAN
produced since 06.1994 till 08.2002

Expert I, metal built-up, VAN
produced since 02.1996 till 01.2007
CITROEN

Evasion, 5 doors, VAN
produced since 06.1994 till 08.2002

Jumpy I, metal built-up, VAN
produced since 09.1994 till 0.2007
FIAT

Scudo I, metal built-up,VAN (220P)
produced since 02.1996 till 01.2007

Ulysse, Lancia Z, 5 doors, VAN, (220/2)
produced since 1994 till 08.2002
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 4170
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
+ Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK Sp.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 10,2 kN
maximum trailer weight: 1800 kg
maximum vertical cup mass: 80 kg
Foreword
9,81
D [kN]
X =
1000