Yealink A30 Guide De Démarrage Rapide page 7

Endpoint Connections
Power Adapter
Note:
• If you only need to use one display, please connect to HDMI 1 port.
• If you connect a touch display device, you can operate the A30 either by remote control or touch control.
• If you connect a non-touch display device, you can use the remote control, mouse or CTP18.
• Please use the mouse when you sign in to the Teams version if you have no remote control.
CTP18 Connection
Pair the CTP18 with A30-Teams:
Sign into the same Microsoft account on both CTP18 and the endpoint, then enter
the PIN code according to the on-screen prompts, after that the system will be auto-
matically paired with the CTP18.
Pair the CTP18 with A30-Zoom:
Enter the IP Address of the A30 in CTP18, then the system will be automatically
paired with the CTP18.
7.5m Ethernet Cable
VCH51
3m Ethernet Cable
1.8m HDMI Cable
3m Ethernet Cable
Display Display
PoE
7.5m Ethernet Cable
Make sure that CTP18 and the
MeetingBar A30 are in the same
LAN.
E
N
G
L
I
S
H
5