Télécharger Imprimer la page

Beper P201UTP003 Mode D'emploi page 7

Chauffe-tasse usb

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials,
gases or burning flames.
Do not allow children, disabled people or every people without
experience or technical ability
not properly watched over. Close supervision is necessary when
any appliance used by or near children.
Warning instructions
Before each use, check the integrity of the cable and do not use it
wrapped. Do not allow the cable cord to come in contact with the hot
parts of the appliance. Do not place the appliance near heat sources
, flammable material and/or substances, and keep it at an adequate
safety distance from other objects or materials when the plate is hot.
Place the appliance only on stable, clean and dry surfaces.
It is advisable not to use the appliance for more than an hour conti-
nuously. Do not place wet cups or mugs on the hot plate, and do not
allow the plate to heat up without any cups or mugs on it.
Warning: the plate becomes hot during operation, exercise
extreme care to avoid burning injuries.
The appliance is equipped with an overheating safety system.
Use instructions
Make sure to place the appliance on a stable surface, and to put cup
or mug at the centre of the hot plate.
Plug the mug warmer to a USB power source (power bank, laptop, ...)
or to a wall socket with a USB adapter (not provided). The plate will
start heating up, to reach its maximum temperature in a few minutes.
When done using, disconnect the appliance from the power source,
and allow it to cool down before storing it.
Cleaning
Clean the appliance only when disconnected from power source and
completely cooled down. Clean the plate and the outer surface with a
soft cloth, slightly dampened with warm water.
to use the appliance if they are
7
EN

Publicité

loading