Kathrein UFO 395 Caractéristiques Techniques page 14

2.2.3.3.1 Selecting the TV channel under "TV"
E 1 TV DasErste
E 1 TV Bayerisch
E 2 TV RTL Telev
E 2 TV n-tv
2.2.3.3.2 Selecting a language for the TV or radio programme/PID display
*** UFO 395-Q1
Video PID 0065
Audio PID 0066
2.2.3.4 Selecting a radio programme under "Ra"
Ra
E 1 Bayern3
E 1 TV Bayerisch
E 2 TV RTL Telev
E 2 TV n-tv
2.2.4 Selecting the output channel
E 1 TV DasErste
E 1 TV Bayerisch
E 2 TV RTL Telev
E 2 TV n-tv
2.2.4.1 Frequency fi ne adjustment
*** UFO 395-Q1
Standard B/G
823.25MHz
HF on Level
Stereo Vol + 0d B
2.2.4.2 Selecting the TV standard
*** UFO 395-Q1
823.25MHz Standard
HF on Level
Stereo Vol + 0d B
Displaying the name of the programme to be selected.
K65
Use the scroll button to display the TV programme to be selected.
K66
On pressing the sub-menu button,
K67
K68
• The type designation for the module and the quad (channel unit part) Q1 to Q4
• The video PID for the selected TV programme and the information whether or
***
not it is encrypted
unscr
• The audio PID for the selected TV audio
If the programme is transmitted in more than one language (e.g. "Euronews"),
deu
the scroll buttons can be used to select the desired language.
Press the sub-menu button
Displaying the name of the programme to be selected.
K65
Use the scroll button to display the radio programme to be selected.
K66
Note:
K67 If no radio channels are registered in the transponder, the display "-no ra service-"
appears and the current TV channel continues to be displayed.
K68
On pressing the sub-menu button,
Select the parameter "Output channel" for the PAL signal. Use the scroll buttons to
K65
set the output channel in 7 MHz or 8 MHz steps from 111.25 MHz to 847.25 MHz
(depending on the standard). Under the TV standards D/K and I, channel display
K66
for special channels is performed by "---". This setting is applied directly on the
adjacent channel also (for Q1 on Q2 and for Q3 on Q4).
K67
Press the sub-menu button
K68
signals".
Select "Output Frequency".
By using the scroll buttons, the exact fi ne adjustment frequency setting for the
***
video carrier can be made in 250 kHz steps. This setting is applied directly on the
adjacent channel also (for Q1 on Q2 and for Q3 on Q4).
max
The parameter "TV Standard" allows selection between the standard B/G, D/K and I.
***
Note:
B/G
B/G: 7 MHz or 8 MHz channel raster, audio carrier: 5.500 MHz and 5.742 MHz
max D/K: 8 MHz channel raster, audio carrier: 6.5 MHz and 6.258 MHz
I: 8 MHz channel raster, audio carrier: 6.0 MHz
The setting up of the standard will be performed in Q1 and will take effect during Q2,
Q3 and Q4.
will be displayed:
to return to the main menu.
will be displayed.
to display the sub-menu "Special settings for cable
5 / 8