Publicité
Les langues disponibles
Les langues disponibles
Multi-CD Player
Introduction of advanced
multi-CD player operation
1
2
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat range is selected to cur-
rent track.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)ITS-P (ITS play)PAUSE
(pause)COMP (compression and DBE)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRK (one-track repeat) and DSC (disc re-
peat).
1
Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2
Press c or d to select the repeat range.
Press c or d until the desired repeat range ap-
pears in the display.
! MCD Repeat all discs in the multi-CD
player magazine
! TRK Repeat just the current track
! DSC Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRK, the repeat play range
changes to DSC.
! When you select DSC for the repeating range
and return to the playback display, DRPT is
displayed.
Playing tracks in random order
Random play lets you play back tracks in ran-
dom order within the repeat range, MCD and
DSC.
1
Select the repeat range.
Refer to Repeating play on this page.
2
Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3
Press a to turn random play on.
RDM :ON appears in the display. Tracks will
play in a random order within the previously
selected MCD or DSC ranges.
4
Press b to turn random play off.
RDM :OFF appears in the display. Tracks will
continue to play in order.
Section
07
27
En
Publicité
