Utilitech Pro 006220B Mode D'emploi page 4

ASSEMBLY INSTRUCTIONS
1. Turn OFF all power to circuit at main circuit breaker or fuse box.
CAUTION: DO NOT rely on wall switch alone to turn off power.
2. Attach crossbar (EE) to junction box (not included)
with the two crossbar screw (CC).
Hardware Used
Crossbar Screw
Crossbar
3. Connect bare ground wire from the fixture to the ground screw
on the crossbar (EE). (The ground screw is painted green.)
Connect white wire from the outlet box to the white wire from the
light fixture (A) by twisting a wire nut (DD) onto bare ends of the
wires. Connect the black wire from the outlet box to the black
wire from the light
onto the bare ends of the wires.
Note: The ground wire may be red and/or have a copper
conductor. The white outlet box wire may be square and/or have
a silver conductor.
Hardware Used
Wire Nut
x2
x1
fixture (A) by twisting a second wire nut (DD)
x 3
4
1
2
3