Publicité
Les langues disponibles
Les langues disponibles
7
Lower the release lever to lock the paper and close the top cover.
8
A screen for selecting the paper type is displayed. Select Coated papers and then HW Coated HG.
If The paper is loaded askew. appears, repeat steps 3 to 7.
●
For the PRO-2100
●
The paper starts feeding, and the printer starts charging the ink for the first time* and adjusting the print head. This takes around 40 minutes.
Do not open the covers of the printer or turn the power off during this time.
* Charges ink between the ink tank and print head and performs cleaning to keep the printer in optimal condition. This may cause the remaining ink indicator and maintenance cartridge
capacity indicator to drop some amount. Since the included starter ink tanks are for initial installation, it is recommended that you purchase replacement ink tanks quickly.
●
A pattern is printed on the paper for print head adjustment and the paper is ejected. Lift up the release lever and remove the paper.
●
If a screen prompting you to add paper is displayed, load paper by referring to steps 3 to 7.
11
Publicité
