Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Replace scratched or bent driver blades (16). Clean the machine only with a soft and
humid tissue without chemical substances. Clean the folding rollers using a sub-
stance that does not dissolve rubber.
Security
The machine must only be used for the stapling and folding of paper.
Connect machine only to an earthed power outlet. Switch off after use.
Make sure that the power requirement indicated at the machine's rear side is the
same being provided on your premises before connecting the power cord. Check
function of safety shut off regularly: The machine must not run with cover (5) ope-
ned.
Clean and service the machine only with the power cord disconnected.
Place on an even support and never in a humid surrounding, avoid direct sunlight
immission.
Never put mugs, glasses or bottles onto the machine.
If you notice smoke, heat, excessive noises or any unusual performance, disconnect
the power cord immediately and call your dealer.
Technical data
Input paper sizes for booklets DIN A5 (5½x8½") - A3 (11x17", SRA3)
Maximum booklet size
Stapling heads
Staple magazine
Staples/Loop Staples
Cycle speed
Power requirements
Weight (shipping weight)
Dimensions
(height x width x length)
Shipping dimensions
(height x width x length)
Accessories
Manufacturer
60 pages or 15 sheets 80g-paper
2, upgradeable to 4 (USA: max. 3)
210 staples/stapling head
NAGEL 26/6 (6mm leg length)
NAGEL Ri 26/6 (6mm leg length, loop)
NAGEL 26/8S (8mm leg length, steel)
User dependent up to 500 booklets/h
230 V AC 50Hz 100W / 115 V AC 60Hz 100W
39kg/86lbs. (41,5kg/91,5lbs.)
290mm/11½" x 490mm/19
420mm/16
Stand on Casters
Additional stapling heads
Original NAGEL-Staples
ERNST NAGEL GMBH, Breitwiesenstraße 21,
D-70565 Stuttgart, Germany
1
/
1
2
/
" x 680mm/26
/
3
14
" x 510mm/20"
3
" x 24"
3
Publicité
