GREADEN GR2RT2 Manuel D'utilisation page 6

ASSEMBLING PROCESS FOR GR2RT2
Step 1: Fix the Bottom Tube to the base by using 3pcs M6*10 bolts.
Step 3: Connect the middle tube with bottom tube by screwing them
together.
Step 4: Connect the top tube with middle tube by screwing them
together. bottom Tube.
Step 6: Place the power cord plug through the top pole, middle pole and
bottom pole, pull the power cord through the bottom of base as far as
it will go.
6
Step 2: Place the Decoration Cover onto the Bottom
Tube.
Step 5: Place the power cord plug through the top pole, middle pole and bot-
tom pole, pull the power cord through the bottom of base as far as it will go.
Step 7: Push the Heater Head onto the Top Tube and fix in position using
the 2*10mm screws.
EN