E-MORE 2M2S TQD Instructions De Montage page 12

ENGLISH
TECHNICAL SPECIFICATIONS
1. Electric Components:
Input Voltage:
Output Voltage:
Duty cycle:
SAFETY AND WARNING!
This product can be used by children age 8 years and older, a persons with reduced physical, sensory or mental capacity as
long as they have been given proper instructions / training on how to use the product in a safe way and understand the haz-
ards involved. Children shall not play with the product.
CORRECT DISPOSAL
This sign indicates that this product must not be disposed through regular household waste within the European
Union. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. There you can obtain all
information necessary to dispose of this product properly. (WEEE-Reg.-Nr. DE: 52242201)
HANDSET
1. Up / Down Keys
To adjust the height of the desk, keep pressing the "UP"
or "DOWN" key until the tabletop reaches the desired position.
2. Display Screen
Display the height value of the desk.
3. Memory Key (1 / 2 / 3 )
After setting memory keys: Keep pressing the memory button, the desk will move to the saved position.
How to set a memory key: Please select the desired position. Then press the S-Key. Then press the desired Button from 1
to 3 to assign the current height to a number on the control panel. Whenever a programmed memory key is pressed, Keep
pressing the memory button, the desk will move to the saved position
4. Set Key „S"
The set key saves all changed settings.
5. Anti-collision function
When the desktop encounters reverse resistance while moving, the desk will stop and move slightly in the opposite direc-
tion.
6. Reset
When the system is experiencing a problem or the control panel displays "RES", the system must be reset. Press and hold
the "DOWN" button throughout the process. After 5 seconds, the desk will lower slightly until it reaches its lowest height,
then rises slightly and the display changes back to the numeric height setting. After the desk stops, the reset process is
successfully completed.
7. Keypad Lock
To lock: Press and hold "UP" and "DOWN" buttons for 5 seconds until "LOC" sign appears on the display, indicating that the
system is locked.
To unlock: Press the "UP" and "DOWN" buttons for 5 seconds at the same time until the "LOC" sign disappears and the
height of the desk is displayed, indicating that the system is ready to be adjusted again.
8. One- or constant-touch mode (memory keys)
Press button "S" + button "UP "and hold them for 2 seconds. The handset will display O.
This means the buttons have switched to one-touch mode.
Press button "S" + button "UP "and hold them for 2 seconds. The handset will display C.
This means the buttons have switched to constant-touch mode.
12
100-240V AC
29V DC
10% max 2min on 18 min off
Automatic power off,
low energy consumption
2. Desk Frame
Anti-Collission
Built-in load limit switch
Max Load: 140 KG (static incl. table top - 2M2S TQD)
160 KG (static incl. table top - 2M3S TQD)
Max Load: 100 KG (dynamic incl. table top - 2M2S TQD)
120 KG (dynamic incl. table top - 2M3S TQD)
Speed: 30 mm/s (2M2S TQD)
38 mm/s (2M3S TQD)
Minimum height: 700 mm (2M2S TQD)
600 mm (2M3S TQD)
Travel-Distance: 480 mm (2M2S TQD)
650 mm (2M3S TQD)
5 years
warranty
USB-Slot
Sideways with charging function
USB-Slot (with charging function)