Haier HLP141E Guide De L'utilisateur page 18

CARE AND CLEANING GUIDE
Clean buildup such as lint on filters after each use, otherwise it will affect the
performance of your dryer.
CLEANING THE LINT SCREEN
Clean lint screen before each load.
Do not run the dryer without the compelte lint filter assembly which
includes lint housing, lint screen, and lint filter.
INSTRUCTION:
The lint filter assembly is located at the back of
the drum, as shown in Figure1.
1. Take the entire lint filter assembly out of the
dryer by firmly grasping the center of the lint
housing and then pulling, as shown in Figure 2.
2. Remove the lint filter from the back of the lint
assembly.
3. Separate the lint screen from the lint housing.
4. Clean lint off the lint screen using fingers or used dryer sheet.
5. Periodically vacuum the lint filter with a brush attachment.
MAINTENANCE
Please unplug the power cord when cleaning the dryer.
Clean the interior drum or dryer housing with a damp
soft cloth.
WARNING!
Do not put water directly on dryer.
Do not use thinner, gasolene or alcohol.
Do not use any type of spray cleaner to clean the interior.
Remove everything from drum before drying the next load.
Clean cabinet with mild soap and water only. Do not use
harsh or abrasive cleaners, as this could damage the dryer.
17
Lint Filter Assembly
Lint Lint Lint
Housing Screen Filter
Lint Filter
Assembly
English
Figure 1
Figure 2
Thinner
Benzene