Cabling And Setup; Default Settings - Atlantis Land Net Fly AP1-54/P Guide De Démarrage Rapide

1.4 Cabling and setup

Connect to the Switch/Hub
Plug in one end of the RJ45 network cable to the Switch/Hub port,

Plug in the other end of the RJ45 network cable to the Wireless Access Point.

Check the installation
The LEDs of the Access Point are clearly visible and the status of the network link can
be seen instantly:
With the power source on, once the device is connected, the Power, LAN and WLAN
port LEDs will light up indicating a normal status.
If the LAN Port's Link indicator does not light up then check the RJ-45 cable if it is
firmly feed to the RJ45 port, while the LAN is link up to the Switch/Hub, the LAN port's
LED will light up.

1.5 Default Settings

The Wireless Multi-Function Access Point can be configured with your Web browser.
The web browser is included as a standard application in following operation systems,
UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The product provides a very
easy and user-friendly interface for configuration.
26