Télécharger Imprimer la page

BGS technic 9858 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

for Opel / Vauxhall 2.0 CDTi / EcoFLEX
TOOLS
1
High-pressure fuel pump sprocket locking tool,
to be used as OEM EN-51413
2
Auxiliary drive belt tensioner locking pin
to be used as OEM EN-955-2
3
Crankshaft timing tool, consisting of tool no. 3a, 3b & 3c
to be used as OEM EN-51412
4
Camshaft locking pin,
to be used as OEM EN-51414
5
Crankshaft pulley holding tool (automatic transmission)
to be used as OEM EN-51411
INTENDED USE
This tool set is designed for checking and setting the engine timing on following cars / engines:
Opel / Vauxhall Cascada (15-17), Insignia / Country Tourer (14-17), Zafira C Tourer (14-17) with 2.0
CDTi / EcoFLEX engine (engine code: LFS/B20DTH).
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
Never place the tool on the vehicle battery. There is a risk of a short circuit.
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
Keep children and other unauthorized persons away from the work area.
Be careful when working on hot engines because of the risk of burn injuries.
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9858
4
2 3a
3b
3c
5
1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicité

loading