Publicité
Les langues disponibles
Les langues disponibles
Attach the camera and/or lens to the new
bracket (01) using the supplied ¼" screws (02)
and washers (03) and fasten the adjustable slide
in the correct position using the screw supplied
for this (04).The supplied spacers (05) can also
be used when positioning the camera.
05
01
03
02
Fig. 07
h
Insert the screws (01) in the heater
holes (02) and place it on the slide;
then fix the heater paying attention
not to damage the cabling.
Replace the new inner slide and lock it
using the screws supplied for this (03).
Adjust the lens.
Re-attach the new heater (04) to the housing/
slide using the supplied screws (01) and
insert the power supply connector (05).
04
Fig. 08
4
04
01
02
05
03
7
Disposal of waste
materials
This symbol mark and recycle system
n
are applied only to EU countries
and not applied to the countries
in the other area of the world.
Your product is designed and manufactured
with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed
of separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Publicité
