Filling The Solution Tank - Hoover ONE PWR SYSTEM FLOORMATE JET Mode D'emploi

FILLING THE SOLUTION TANK

CAUTION:
USE EXTRA CARE WHEN CLEANING ON STAIRS. TO AVOID PERSONAL INJURY OR DAMAGE,
AND TO PREVENT THE CLEANER FROM FALLING, ALWAYS PLACE CLEANER AT BOTTOM OF STAIRS OR ON
FLOOR. DO NOT PLACE CLEANER ON STAIRS OR FURNITURE, AS IT MAY RESULT IN INJURY OR DAMAGE.
1
Remove the solution tank from
the back of the unit by gently
pulling up on the tank.
8
2
Remove the cap.
WARNING:
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DUE TO INTERNAL COMPONENT
DAMAGE, USE ONLY HOOVER CLEANING PRODUCTS(S) INTENDED FOR USE WITH THE APPLIANCE.
3
Fill with warm water to appropriate water
line. Add solution to solution line.
Large Spaces
(cleans up to 600 sq ft)
Small Spaces
(cleans up to 300 sq ft)
4
Replace cap and install tank
into body with the cap down.