Waring Commercial Torq 2.0 TBB Serie Mode D'emploi page 6

BEFORE FIRST USE
After unpacking, follow the Cleaning and Sanitizing Instructions
on page 9 before first use and if you have not used your blender
for a period of time. Thoroughly dry the container before placing it
on the base.
OPERATING INSTRUCTIONS
TBB145 – Toggle Switch Controls
1. With the blender unplugged and
in the OFF position, place the
container on the blender base.
Be sure container is fully seated
and that the drive coupling is
properly engaged.
2. Plug the power cord into an
outlet and the LED operating
light will illuminate.
3. Put ingredients into the container and place the lid on top.
Do not fill above MAX FILL line.
4. This blender has 2 speed settings: HI and LO. Switch toggle
switch to desired position. Always use HI or PULSE for
crushing ice.
5. When blending is complete, set toggle switch to OFF
position.
6. This blender is equipped with a PULSE option. Hold toggle
switch in down position to engage PULSE function. Unit will
run on MAX speed until the toggle switch is released.
NOTE: This blender utilizes a Slow Start
beginning HI or LO operation, the unit will start in a lower speed
for 1 second and then switch to the full selected speed. PULSE
utilizes a .5-second Slow Start
blending of ingredients in the container.
7. Allow motor to come to a complete stop before removing
container from blender base. Never place the container
on the motor base or remove it from the motor base while
motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without lid.
feature. When
™
. This allows for a more even
™
6