Publicité
Les langues disponibles
Les langues disponibles
EN
2. Align the release button (9) with the location hole (10)
and move the two shafts together.
3. Turn the upper shaft (8) until the release button (9) locks
into the location hole (10).
4. Tighten the lock knob (12).
7.3
ATTACH THE AUXILIARY
HANDLE
English
7
13
8
1. Push the auxiliary handle (7) onto the upper shaft (8).
2. Move the auxiliary handle (7) above the metal ring (13)
and make sure that the metal ring (13) fits between the
slot on the auxiliary handle (7).
3. Align the holes on the auxiliary handle (7) and the metal
ring (13).
4. Put the handle knob (14) through the holes and tighten it.
7.4
8
INSTALL THE BATTERY PACK
1
14
16
Publicité
