Publicité
Les langues disponibles
Les langues disponibles
EN
9. Install the impeller shaft with pulley assembly attached in
the new impeller. Make sure that you replace the retained
shaft sleeve on the left side of the shaft.
10. Replace and tighten the remaining nut on the left side
plate assembly, screws on the left side cover and screws
on the pulley assembly.
English
11. Put the belt and the belt tensioner into position.
12. Replace and tighten the remaining screws on the right
side cover.
10
TRANSPORTATION AND
STORAGE
•
Clean the machine before storage.
•
Make sure the engine is not hot when you stow the
machine.
•
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
•
Replace the damaged parts.
•
Tighten the bolts.
•
Speak to a person of an approved service center.
•
Stow the machine in a locked, dry area.
12
Publicité
