Troubleshooting - RayTek Raynger ST60 ProPlus Mode D'emploi

Masquer les pouces Voir aussi pour Raynger ST60 ProPlus:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English

Troubleshooting

Code
– – – (on display)
Battery icon
appears
Blank display
Laser doesn't work
ERR
CE Certification
This instrument conforms to the following standards:
• EN50081-1:1992, Electromagnetic Emissions
• EN50082-1:1997, Electromagnetic Susceptibility
Tests were conducted using a frequency range of 80-1000 MHz with the instrument in
three orientations. The average error for the three orientations is ±1.4°C (±2.5°F) at 3
v/m throughout the spectrum. However, between 162 MHz and 792 MHz at 3 V/m, the
instrument may not meet its stated accuracy.
1.800.561.8187
14
Problem
Target temperature
is over or under range
Low battery
Possible dead battery
(1) Low or dead battery
(2) Ambient temperature
above 40°C (104°F)
Possible damage
by EMF
www.
.com
Action
Select target within specifications
Check and/or replace battery
Check and/or replace battery
(1) Replace battery
(2) Use in area with lower ambient
temperature
Contact your distributor
information@itm.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Raynger st80 proplusRaynger st serie

Table des Matières