Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

Raynger
ST
®
™ Standard
ST20 Pro
ST30 Pro ™ Enhanced
Noncontact Thermometer • Fernmessthermometer
• Thermomètre sans Contact • Termómetro sin Contacto
• Termômetro sem Contato
Table of Contents
Unit diagram . . . . . . . . . . . . . .1
English . . . . . . . . . . . . . . . . . . .2
Deutsch . . . . . . . . . . . . . . . . . .9
Français . . . . . . . . . . . . . . . . .16
Español . . . . . . . . . . . . . . . . .23
Português . . . . . . . . . . . . . . .30
Chinese . . . . . . . . . . . . . . . . .37
Japanese . . . . . . . . . . . . . . . .44
57500-1 Rev. E 9/01
sales@GlobalTestSupply.com
1.888.610.7664

Publicité

Table des Matières
loading

Sommaire des Matières pour RayTek Raynger ST Serie

  • Page 1: Table Des Matières

    ™ Raynger ® ™ Standard ST20 Pro ST30 Pro ™ Enhanced Noncontact Thermometer • Fernmessthermometer • Thermomètre sans Contact • Termómetro sin Contacto • Termômetro sem Contato • • Table of Contents Unit diagram ....1 English .
  • Page 2 Specifications Temperature range ST20 Pro™ -32 to 400°C (-25 to 750°F) ST30 Pro™ -32 to 545°C (-25 to 950°F) D : S 12 : 1 (ST30 has 90% encircled energy at the focal point) Display resolution 0.2°C (0.5°F) Accuracy For targets: (assumes ambient Above 23°C (73°F): ±1% of reading or ±1°C (±2°F), operating temperature...
  • Page 3 • Laser • Display • Laser • Anzeige • Laser • Affichage • Láser • Pantalla • Laser • Display • • Trigger • • • Messtaste • • Gâchette • °C/°F Switch • Gatillo • °C/°F-Schalter • Gatilho • Commutateur °C/°F •...
  • Page 4: English

    English Warning C A U T I O N LASER RADIATION - DO NOT STARE INTO BEAM Do not point laser directly at eye or indi- Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm and 1040.11 CLASS 2 (II) LASER PRODUCT rectly off reflective surfaces.
  • Page 5 English Features Your thermometer includes: • Single-point laser sighting (Standard Model) • Circular laser sighting (Enhanced Model) • MAX temperature display • Backlit graphic display • Tripod mount • Durable, ergonomic construction Options/Accessories • Nylon Holster • N.I.S.T./DKD Certification Display A) Low battery indicator (comes on when battery is low) B) °C/°F symbol...
  • Page 6: How It Works

    English Introduction We are confident you will find many uses for your handheld noncontact thermome- ter. Compact, rugged, and easy to use— just aim, pull the trigger, and read the temperature in less than a second. You can safely measure surface temperatures of hot, hazardous, or hard-to-reach objects without contact.
  • Page 7 English How to Operate the Unit Measurement: Quick Start To measure a temperature, point the unit at an object, and pull the trigger. Be sure to consider distance-to-spot size ratio and field of view. When using the laser, use it only for aiming.
  • Page 8: How To Accurately Measure Temperature

    English How to Accurately Measure Temperature Locating a Hot or Cold Spot To find a hot or cold spot, aim the ther- mometer outside the area of interest. Then scan across the area with an up and down motion until you locate the hot or cold spot.
  • Page 9: Distance & Spot Size

    English Distance & Spot Size 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm As the distance (D) from the object increases, the spot size (S) of the area measured by the unit becomes larger. The relationship between distance and spot size is 12:1 at the focus point (0.914 meter/36 inches).
  • Page 10 English Maintenance Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a soft brush. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water. Note: Do not use solvents to clean the plastic lens. Cleaning the housing: Use soap and water on a damp sponge or soft cloth.
  • Page 11: Deutsch

    Deutsch Warnung C A U T I O N Richten Sie den Laser nicht direkt oder indi- LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm and 1040.11 rekt über reflektierende Oberflächen auf die CLASS 2 (II) LASER PRODUCT Augen.
  • Page 12: Zubehör Und Optionen

    Deutsch Ausstattung Ihr Thermometer verfügt über: • Einzellaservisier (Standardmodell) • Laserkreisvisier (Sondermodell) • Maximaltemperaturanzeige • beleuchtete grafische Anzeige • Stativanschlussgewinde • solide, ergonomische Konstruktion Zubehör und Optionen • Tasche mit Gürtelclip • N.I.S.T./DKD Zertifizierung Display A) Batterieverbrauchsanzeige (erscheint wenn die Batterieladung zu schwach ist) B) °C/°F Symbol C) Maximaltemperaturanzeige (wird ständig aktualisiert)
  • Page 13 Deutsch Einführung Wir sind überzeugt, daß Sie für Ihr Fernmessungsthermometer zahlreiche Anwendungen finden werden. Kompakt, robust und einfach zu bedienen – einfach auf das Ziel richten, den Knopf drücken, und in weniger als einer Sekunde können Sie die momentane Oberflächentemperatur ablesen. So lassen sich die Oberflächentemperaturen von heißen, gefährlichen oder schwer erre- ichbaren Objekten gefahrlos und ohne...
  • Page 14: Bedienung Des Gerätes

    Deutsch Bedienung des Gerätes Zur Temperaturbestimmung wird das Gerät auf ein Objekt gerichtet und die Meßtaste gedrückt. Denken Sie daran, das Verhältnis von Entfernung und Messfeld sowie das Sichtfeld zu berücksichtigen. Falls das Gerät mit einem Laser aus- gerüstet ist, benutzen Sie diesen nur zum Zielen.
  • Page 15 Deutsch Korrekte Temperaturbestimmung Feststellen von Temperaturabweichungen Um Temperaturabweichungen sicher festzustellen, zielen Sie mit dem Gerät außerhalb des Kernbereichs und tasten dann zeilenweise über die Messfläche, bis Sie die Temperaturabweichung gefunden haben. Sichtfeld Achten Sie darauf, daß das Meßobjekt größer ist als die Meßfleckgröße des Gerätes.
  • Page 16 Deutsch Entfernung und Messfeldgröße 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm Mit zunehmender Entfernung (D) vom Objekt nimmt die Fläche (S) des vom Gerät gemessenen Bereichs zu. Das Verhältnis zwischen Messentfernung und Messfeldgröße beträgt im Scharfpunkt (0,914 m) 12:1. 3"...
  • Page 17: Fehlersuche Und -Behebung

    Deutsch Wartung Reinigung der Linse: Blasen Sie lose Teilchen mit reiner Preßluft weg. Zurückbleibende Verunreinigungen werden dann vorsichtig mit einem weichen Pinsel entfernt. Wischen Sie die Oberfläche vorsichtig mit einem feuchten Wattebausch ab. Der Wattebausch kann mit Wasser befeuchtet werden. Hinweis: Keine Lösungsmittel zur Reinigung der Linse verwenden.
  • Page 18: Français

    Français Avertissement C A U T I O N Ne pointez pas le rayon laser directement LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm dans les yeux ou indirectement sur des and 1040.11 CLASS 2 (II) LASER PRODUCT surfaces réfléchissantes.
  • Page 19: Caractéristiques

    Français Caractéristiques Votre thermomètre comprend : • Visée laser simple (Standard Model) • Visée laser circulaire (Advanced Model) • Affichage de la température MAX • Affichage graphique rétroéclairé • Possibilité d’un montage sur trépied • Conception ergonomique et résistante Options/Accessoires •...
  • Page 20: Principe De Fonctionnement

    Français Introduction Nous sommes certains que vous trouverez plusieurs utilisations pour le thermomètre portable sans contact . Compact, robuste et facile à utiliser - il suffit de viser et d’appuyer sur la gâchette pour connaître en moins d’une seconde la température de la surface.
  • Page 21 Français Principe de fonctionnement Utilisation du thermomètre Pour mesurer une température, pointez l’in- strument sur un objet et appuyez sur la gâchette. Veillez à tenir compte du champ de visée et du rapport distance-dimension du spot. L’usage du laser est réservé à la visée de la cible.
  • Page 22: Comment Mesurer Précisément La Température

    Français Comment mesurer précisément la température Localiser un point chaud ou froid Pour trouver un point chaud ou froid, viser en dehors de la zone à contrôler ; puis bal- ayer de haut en bas la zone à contrôler jusqu’à identification d’un point chaud ou froid.
  • Page 23: Visée Circulaire Laser

    Français Distance et taille du spot 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm mesuré La taille du spot mesuré (S) s’accroît avec la distance (D) séparant le ther- momètre de la cible. La relation distance / diamètre de la cible est de 12/1 au point focal 3"...
  • Page 24: Entretien

    Français Entretien Nettoyage de l’optique : ôtez les particules libres en soufflant de l’air comprimé pro- pre. Eliminez les débris restants en brossant délicatement à l’aide d’une brosse douce. Essuyez avec précaution la surface à l’aide d’un coton-tige humide (que vous pouvez humidifier avec de l’eau).
  • Page 25: Español

    Español Advertencia C A U T I O N No apunte el láser directamente hacia los LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm and 1040.11 CLASS 2 (II) LASER PRODUCT ojos o indirectamente desde superficies reflectantes.
  • Page 26: Características

    Español Características Su termómetro incluye: • Mira láser de un punto (Standard Model) • Mira láser circular (Advanced Model) • Indicación en pantalla de la temperatura • Pantalla gráfica con iluminación de fondo • Montaje en tripode • Diseño ergonómico y resistente. Opciones/Accesorios •...
  • Page 27: Cómo Funciona

    Español Introducción Confiamos en que encontrará muchos usos para su termómetro portátil sin Contacto. Compacto, duradero y fácil de usar —tan sólo hay que apuntar, oprimir el gatillo y podrá leer las temperaturas reales de super- ficie en menos de un segundo. Puede medir sin peligro alguno la temperatura de la superficie de objetos calientes, peligrosos o de difícil acceso, sin tener que tocarlos.
  • Page 28 Español Cómo funciona la unidad Introducción rápida a las medidas Para medir una temperatura, apunte la unidad hacia un objeto y oprima el gatillo. Asegúrese de considerar la relación distan- cia-tamaño del área a medir. Cuando utilice el láser, úselo únicamente para apuntar (mira).
  • Page 29: Como Medir Temperatura Con Precisión

    Español Como Medir Temperatura con Precisión Localización de un punto caliente o frío Para localizar un punto caliente o frío, apunte el termómetro fuera del área de interés. Entonces, sin soltar el gatillo, realice un bar- rido a través del área con movimientos de arriba abajo hasta que localice el punto caliente o frío.
  • Page 30: Distancia Y Tamaño Del Área Medida

    Español Distancia y Tamaño del área 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm medida A medida que aumenta la distancia (D) desde el objeto, el diámetro del área medida (S) se vuelve más grande. La relación entre la distancia y el área medi- da es de 12:1 en el punto focal (0.914 3"...
  • Page 31: Localización De Problemas

    Español Mantenimiento Limpieza de la lente: Elimine las partículas sueltas con aire comprimido limpio y seco. Cepille suavemente cualquier partícula sobrante con un cepillo blando. Limpie cuidadosamente la superficie con un trapo húmedo. Lo puede humedecer con agua. Nota: No utilice disolventes para limpiar la lente de vidrio. Limpieza del estuche: use agua y jabón en una esponja húmeda o paño suave.
  • Page 32: Português

    Português Atenção C A U T I O N Não aponte o laser para os olhos ou para LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm superfícies reflectivas. and 1040.11 CLASS 2 (II) LASER PRODUCT Etiqueta de Identificação do...
  • Page 33 Português Características Seu termômetro inclui : • mira laser simples (Standard Model) • mira laser circular (Advanced Model) • temperatura MAX no display • display retroiluminado • conexão para tripé • durável, ergonômico Opções / Acessórios • bolsa para transporte de Nylon e gancho para fixação ao cinto •...
  • Page 34 Português Introdução Estamos seguros que você encontrará muitas aplicações para o seu termômetro portátil sem contato. É compacto, robusto e fácil de usar – apenas aponte, pres- sione o gatilho e leia a temperatura superficial dos objetos em menos de um segundo.
  • Page 35 Português Como operar a unidade Operando a unidade Para medir temperatura de um objeto aponte o termômetro e aperte o gatilho. Certifique- se de levar em conta a distância e a área de medição desejada, conforme diagrama ótico. Se for um modelo com mira laser utilize o laser somente para mirar.
  • Page 36 Português Como Medir Temperaturas Com Precisão Localizando pontos quentes e frios Para achar pontos quentes ou frios, mire o termômetro para a área de interesse. Então movimente para cima e para baixo até localizar o ponto quente ou frio. Campo de Visão Certifique-se que o objeto é...
  • Page 37 Português Distância e Área de Medição 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm A medida que a distância (D) do ter- mômetro ao objeto aumenta, a área de medição (S) aumenta proporcional- mente. O relacionamento entre a distân- cia e o tamanho do alvo é...
  • Page 38: Identificação De Problemas

    Portugués Manutenção Limpeza das lentes : sopre as partículas aderidas à lente com ar comprimido limpo. Escove com suavidade as partículas remanescentes com uma escova macia. Utilize um cotonete umedecido em água para finalizar. Nota : NÃO utilize solventes ou álcool para limpar as lentes.
  • Page 39: Chinese

    Chinese C A U T I O N LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm and 1040.11 CLASS 2 (II) LASER PRODUCT sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 40 Chinese sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 41 Chinese Reflected energy Emitted energy EMISSIVITY Transmitted energy Target sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 42 Chinese sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 43 Chinese sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 44 Chinese 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm 3" 5.3" @ 1.5" @ 36" 60" @ 12" sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 45 Chinese (+/- 5%) sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 46: Japanese

    Japanese C A U T I O N LASER RADIATION - DO NOT STARE INTO BEAM Complies with FDA 21CFR 1040.10 OUTPUT <1mW WAVELENGTH 630 - 670 nm and 1040.11 CLASS 2 (II) LASER PRODUCT sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 47 Japanese sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 48 Japanese Reflected energy Emitted energy EMISSIVITY Transmitted energy Target sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 49 Japanese Button sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 50 Japanese sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 51 Japanese 38mm @ 75mm @ 132mm @ 300mm 900mm 1500mm 3" 5.3" @ 1.5" @ 36" 60" @ 12" sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 52 Japanese (+/- 5%) sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 53 sales@GlobalTestSupply.com 1.888.610.7664...
  • Page 54 Some Noncontact Thermometer Uses Electrical/Industrial • Industrieanwendungen • Électricité/Méchanique industrielle • Uso electromecánico Industrial • Manutenção Elétrica e Industrial • • Automotive & Diesel • KFZ-Reparatur und Wartung • Véhicules (essence et diesel) • Automotriz y Diesel • Automotivo e Diesel •...
  • Page 55 Fax: 1 831 425 4561 Raytek UK Ltd. solutions@raytek.com PO Box 120 Milton Keynes Buckinghamshire MK1 1ZU Raytek de Mexico, S.A. de C.V. United Kingdom 13 Poniente #2313-2 Col. La Piedad Tel: 44 1908 630800 Puebla, Pue. CP 72160 Mexico...

Ce manuel est également adapté pour:

Raynger st20 pro standardRaynger st30 pro enhancedRaynger st20 proRaynger st30 pro

Table des Matières