Publicité
Les langues disponibles
Les langues disponibles
Wire colors and connection points for connection wires
Never connect the power supply to the speaker wires (No.7 and No.8),
otherwise it will cause damage to the main unit.
Caution
1
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
2
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
Ground (Black)
3
Connect where good body grounding is available.
Antenna power supply (Blue)
4
Connect to the automatic-antenna control terminal of the vehicle.
5
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Control power supply (Blue/White)
6
Connect the control terminal for the external amplifier, etc.
Front speaker output wires
7
Connect to the front speakers.
Rear speaker output wires
8
Connect to the rear speakers.
Genuine factory steering remote control terminal
9
Connect to the vehicle steering remote control.
※ Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
Main unit connections (For CD7100 and CD5100)
A
Line-out terminals (Front / Hi)
Connect to the RCA connector of an external amplifier.
B
Line-out terminals ( Rear / Mid)
Connect to the RCA connector of an external amplifier.
White:
Left +
White/black:
Gray:
Right +
Gray/Black:
Green: Left +
Green/black:
Purple: Right +
Purple/Black:
Ask your dealer for details.
- 6 -
2
Left -
Right -
Left -
Right -
Publicité
