Troubleshooting & Warranty; Troubleshooting - Black & Decker BHDS156 Manuel D'instructions

TROUBLESHOOTING & WARRANTY
BEFORE YOU CALL FOR SERVICE
IF THE HEATER/FAN FAILS TO OPERATE:
A) Check to make sure that the heater/fan is plugged in securely. If it is not,
remove the plug from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem
to be operating properly, test the outlet with another appliance.
C) Check if electricity to the main power switch of the unit appears to be
working.
D) Make sure the heater is in the upright position.
NOTE: For the heater to function properly, the desired temperature on the heater
must be set a few degrees higher than the temperature in the room. If the
unit seems to not be heating properly, increase the desired temperature
on the heater to fully engage the heating elements.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED
TECHNICIAN.
WARNING:
CUSTOMER SERVICE
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
W Appliance Co. Customer Satisfaction Center at
844-299-0879 or service@appliance.com
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
Page 10
DO NOT TRY TO ADJUST OR REPAIR THE HEATER/FAN
YOURSELF.