Wahl Ermila Magic Straight+ Mode D'emploi page 11

General user information
Information about using the operating manual
f Before using the appliance for the first time, you must read and
understand the operating manual completely.
f Consider the operating manual as part of the product and store it in
a safe and accessible place.
f This operating manual is also available in PDF format from our ser-
vice centres. The EC declaration of conformity can also be requested
in other official EU languages from our service centres.
f Include this operating manual if passing the appliance on to a
third party.
Explanation of symbols and notes
The following symbols and signal words are used in this operating
manual, on the appliance or on the packaging.
PROHIBITED
This symbol prohibits the use of the appliance near bathtubs,
showers, washbasins and other water-filled containers.
DANGER
Danger of electric shock which may result in serious physical
injury or death.
DANGER
Danger of explosion which may result in serious physical
injury or death.
DANGER
Danger due to the use of flammable materials. Danger of
fire development which may result in serious physical injury
or death.
WARNING
Warning of possible physical injury or a health risk.
CAUTION
Information about danger of material damage.
Note with useful information and tips.
Action to be taken by owner.
f
Carry out these actions in the sequence described.
1.
2.
3.
Product description
Description of parts (Fig. 1)
A Heating plates, springloaded
B Handle
C LCD display
D Temperature switch
E On/off switch
F Mains cable with hanging loop
Technical data
Operating voltage: 220 – 240 V AC / 50/60 Hz
Power consumption: 50 W
Dimensions (LxWxH): 260 x 30 x 40 mm
Weight: 253 g (without cable)
Operating conditions:
Ambient temperature: 0 °C – +40 °C
The hair straightener is safety insulated and radio screened. It meets the
requirements of EU Electromagnetic Compatibility Directive 2014/30/EU
and Low Voltage Directive 2014/35/EU.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the hair straightener with the voltage
stated on the nameplate.
Operation
1. Insert the mains plug into the socket. A double acoustic signal
will sound.
2. Switch on the hair straightener using the on/off switch (E) (Fig. 2).
An acoustic signal will sound. The LCD display shines blue and
shows the current temperature. The highest temperature is preset
at 230 °C.
3. Set the desired operating temperature with the temperature switch
(D).
 Increase temperature
 Reduce temperature
An acoustic signal will sound during adjustment.
The operating temperature can be set within a range of
80 – 230 °C in 10 °C increments. Once the set operating
temperature has been reached, the hair straightener display
shows the temperature.
4. After using the hair straightener, switch it off by holding down the
on/off switch (Fig. 2). The LCD display goes out.
5. Disconnect from the mains.
6. Allow the hair straightener to cool down.
E N G L I S H
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
11
ar