Equipment | Functions; Preparation For Use - Casada braintronics AURA Manuel

Masquer les pouces Voir aussi pour braintronics AURA:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

Equipment | Functions

1. Pillow
1
2. Bluetooth Speaker
2
3. Backrest Cushion
3
4. Quick access remote
5. Seat cushion
4
6. Shoulder Massage
7. Braintronics
logo LED
®
5
8. Armrest
9. Remote Control
10. Side Panel
11. Footrest
2 Airbags
12 Airbags
6 Airbags
20

Preparation for use

6
7
8
9
10
11
Warning!
Do not put the power cord under the chair! Beware of damaging the power cord!
Warning!
Before moving the chair, adjust the footrest back to its original position.
Do not move the chair when occupied or in use.
Moving the chair may cause damage to the floor. Floor protection is recommended (e.g. rugs or
carpet).
Do not drop or suddenly let go of the chair when moving as it may damage the chair.
Two persons are recommended when moving the chair and extra care is required.
1. Place the chair in an open area
Allow sufficient space around the chair for reclining purpo-
ses.
To avoid damage to the floor and to reduce noise, please
put a rug under the chair.
Make sure that there is no barrier at the front and the back
of the chair.
Please do not put the chair on wet or uneven floor.
To avoid signal interference, please place the chair 1 meter
away from TV and radio.
Do not expose the chair to direct sunlight or a hightempera-
ture place. Otherwise its leather may fade or harden.
2. Move the chair
As illustrated, push the backrest downwards and tilt chair on
to its wheels at a 45° angle.
Slowly push and move the chair to the desired location.
Lower the chair slowly and smoothly until it is fully flat on the
ground.
21

Publicité

Table des Matières
loading

Table des Matières