Ghost BARLY Manuel page 18

SOUD - Selection of audio mode and microphone sensitivity
Press the MENU button until SOUD is displayed. Press ENTER.
The display shows "SO 0" to "SO16". Select the desired program with the UP & DOWN keys. Press ENTER
to validate the selection, then set the desired microphone sensitivity between
"SE00" (the least sensitive) and "SE99" (the most sensitive) with the UP & DOWN keys, Press ENTER to
validate the selection.
Auto - Selection of automatic mode and program scrolling speed
Press the MENU button until AUTO is displayed. Press ENTER.
The display shows "AU 0" to "AU16". Select the desired program with the UP & DOWN keys. Press ENTER
to validate the selection, then set the desired scrolling speed between
"SP 1" (slowest) and "SP 9" (fastest) with the UP & DOWN keys, Press ENTER to validate the selection.
Colo - Selection of a fixed color
Press the MENU button until COLO is displayed. Press ENTER.
The display shows "Co 0" to "CO 7". Select the desired color with the UP & DOWN keys. Press ENTER to
validate the selection.
Manu - Manual Mode
Adjusting the intensity color by color: Red = Red - Gree = Green - Blue = Blue.
Press the MENU key until Red (or Gree - Blue is displayed.
Press ENTER. Select the color intensity with the UP & DOWN keys. Press ENTER to validate the value.
diSP - Adjustment of display orientation
Press MENU, select DISP. Press ENTER to start the adjustment. Use the UP & DOWN key to select DSIP
and invert the display or DISP to return to normal orientation. Press ENTER to confirm your choice.
VER - Version display
Press MENU, select VER and press ENTER to display the firmware version.
Page 18