Zagg Slim Book Pro Manuel page 2

INSERTING/REMOVING YOUR iPad® Pro
Because the power and volume control buttons on your
iPad Pro sit higher than on other devices, you need to
take extra care when inserting it into the Slim Book Pro
cover. To do this, follow these instructions:
1. Insert your iPad at an angle such that the power
and volume control buttons fit into their respective
cutouts on the Slim Book Pro cover.
2. Set the rest of your iPad into the cover and press it
in. Press all around your iPad to ensure it has seated
properly.
3. To easily remove your iPad from the case, separate the
case from the keyboard, and then gently roll the
rubber overmold away from the edges while pressing
the tablet from behind. Grasp your tablet's exposed
side and lift/pull away from the Slim Book Pro.
POWERING ON AND OFF
To turn your Slim Book Pro on, press the power button. The keyboard
backlights will turn on and begin pulsing for about two seconds while the
keyboard powers up. To turn your Slim Book Pro off, press and hold the
power button for three seconds. The keyboard backlights will pulse for
about two seconds and then turn off, indicating your Slim Book Pro has
turned off.
1