Publicité
Les langues disponibles
Les langues disponibles
125987510_UK_I.qxp
2007-03-30
13:15
Page 14
Structure of the appliance
Duration of selected programme
After you have selected the programme, its duration (in hours and
minutes) appears on the display. It is calculated automatically on
the basis of the maximum load accepted for each type of fabric and
of the required degree of drying.
When the programme starts, the remaining time is displayed every 5
minutes.
Delayed start
If you have selected a delay time by means of the relevant button,
the display shows it for 2 seconds;then it shows the duration of the
previously selected programme.
The countdown is displayed every 30 minutes until it displays "90
minutes" and then hour by hour.
End of programme
A flashing zero indicates the end of the programme and it is dis-
played after the "anticreasing" phase.
14
Publicité
