Veridian ENDEAVOR Mode D'emploi page 9

MAINTENANCE (continued)
2.
To remove the dust filter, turn the filter to the clockwise direction to unlock the filter
and it can be pulled out from the cleaner.
3.
To remove the cyclone separator, turn the cyclone separator clockwise to unlock the
separator and it can be pulled out from the cleaner.
4.
To remove the exhaust filter, press the filter release button and pull it out from the
cleaner. Then, pull the filter out from the filter holder.
5.
All the filters can be washed. Rinse under lukewarm water. The filters need to be air
dried for 24 hours before it can be reinstalled to the machine.
NOTE:
The exhaust filter is recommended to be replaced every 6 months.
CLEANING THE ROLLER BRUSH:
1.
Using your finger, slide the base cap outward to allow removal of the roller brush.
2.
Remove the brush cover to take the roller brush out for cleaning.
9