Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Safety warnings
Read the following warnings to prevent personal injury, CB radio or
antenna damage.
• Before using this CB radio, read carefully the instructions in this
manual. Keep the user manual for future reference.
• Before using the CB radio, connect the CB antenna. Check the
SWR before transmitting.
• This CB radio was designed to be powered at 12V DC voltage. Do not
use a voltage higher than the recommended one.
• Do not use the CB radio in an environment with excessive dust or
moisture.
• Do not expose the CB radio to direct sunlight.
• Do not connect the antenna to the CB radio while transmitting.
• Do not use the CB radio near devices that cause interference (eg
televisions)
• Do not touch the antenna while transmitting.
• Do not transmit for a long time, the CB radio may heat up and
malfunction.
• Avoid exposing the CB radio to temperatures lower than -26°C and
higher than +80°C. The temperature inside a vehicle can sometimes
exceed 80°C, which can cause irreparable damage in the event of
prolonged exposure.
• Please do not cover the CB radio with other objects as it will prevent
it from cooling up.
• Turning off the CB radio before starting the car's engine is essential,
to avoid damage caused by high start-up voltage.
• If you notice smoke or odor coming out of the CB radio, unplug the
CB radio immediately and contact a service center.
• In case of malfunction, do not repair the CB radio by yourself, call a
specialized service center.
3

User manual

Publicité

Table des Matières
loading

Table des Matières