JBL Artemio Set Mode D'emploi page 12

If required, some of the nauplii can be transferred to a larger aquarium
with saltwater and grown on. As food for the nauplii, we recommend JBL
ArtemioFluid, available from you specialist retailer.
7. Once all the live nauplii have been fed to the young fish, drain off the
remaining water and the egg cases into the waste water system. Before refilling
the brood container, rinse it thoroughly, together with the domed lid, under
lukewarm tap water using a soft bottle brush.
Installation and operation of Artemio 1
7
If more Artemia nauplii are needed to feed a larger number of young fish, the
JBL ArtemioSet can be expanded by adding the JBL Artemio 1 extension
unit. By staggering the setting up times of several containers, a continual supply
of live food can be produced as and when needed:
1. Connect the stand (1) of JBL Artemio 1 by simply hooking it on to the
stand of the JBL ArtemioSet already in place. Alternatively, select a place
where the equipment can be wall-mounted, fixing the stand (1) with the screws
(12) supplied.
2. Fill the brood container (2) of the JBL Artemio 1 as described above in
Points 2 and 3 of the installation instructions for the JBL Artemio Set.
3. Connect the air outlet (5) on the lid of the JBL Artemio Set with the air
inlet (4) on the lid of the JBL Artemio 1 using a piece of air hose cut to fit.
This makes economic use of the expelled air. In the same manner, up to 5 JBL
Artemio 1 extensions can be added on to a JBL ArtemioSet without any
need for an additional aerator pump.
4. Proceed as described above in Points 6 and 7 of the installation instructions
for the JBL Artemio Set.
8 Changing the membrane on the aerator pump:
Always disconnect the appliance from the mains power supply before carrying
out any work on the air pump
See Illus. 8) a – h
9 Accessories (available from your specialist retailer)
JBL Artemio 2 Harvesting container for JBL Artemio
JBL Artemio 3 Artemia sieve for JBL Artemio (0.15 mm)
12