ASROCK K8N68PV-GLAN Manuel page 7

CAUTION!
1. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 21 for details.
2. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
3. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal grease
between the CPU and the heatsink when you install the PC system.
4. The maximum shared memory size is defined by the chipset vendor
and is subject to change. Please check NVIDIA
information.
5. This DVI-D port for the chipset adopted on this motherboard can support
DVI/HDCP and HDMI format signal. You may use the DVI to HDMI adapter to
convert this DVI-D port to HDMI interface. DVI to HDMI adapter is not bundled
with our product, please refer to the adapter vendor for further information.
6. Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 24 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect
SATA hard disk to SATAII connector directly.
7. Power Management for USB 2.0 works fine under Microsoft
TM TM
Vista 64-bit / Vista / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
ASRock K8N68PV-GLAN
® website for the latest
® ®
Windows
Motherboard
7 7 7 7 7