LF Utilitech 6211W-PIR23A Mode D'emploi page 5

2. Remove the crossbar from the fixture (A) by screwing the screw
pre-assembled in A.
3. Attach crossbar to junction box (not included) with the two
crossbar screws (AA).
Hardware Used
AA
Crossbar Screw
4. Connect ground wire from the outlet box to the ground screw on
the crossbar. Connect white wire from the outlet box to the white
wire from the fixture by twisting a wire nut (BB) onto bare ends of
the wires. Connect the black wire from the outlet box to the black
wire from the fixture by twisting a wire nut (BB) onto the bare
ends of the wires.
Hardware Used
Wire Nut
BB
x 2
x 2
5
2
A
AA
3
4
BB
BB
AA