Button (Cd / Mp3); Mode Button (Mode); Automatic Or Manual Tuning; 10 Button - Roadstar CD-770BT Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
(B) CD/MP3 PLAYER MODE:
1. PAUSE 2. INTRO 3. REPEAT 4. RANDOM
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (Euro-
pean Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of
information services and automatic retuning functions for RDS-compatible car stereos.
In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and
Sweden. Test transmissions are being conducted in many other european countries. It is
expected that RDS will be available in most western european countries in the near future.
5. 'AF/REG' function (ALTERNATIVE FREQUENCIES)
When pressed, AF/REG switchig mode is selected.
When AF/REG switching mode is selected, the radio checks the signal strength of the AF
all the time. When pressed long, it is activated as regional mode ON/OFF.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as
current station. REG segment is turned on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
6. 'TA' function (TRAFFIC ANNOUNCEMENT)
When pressed short, it is activated as TA mode on or off
When TA mode is on and traffic announcement is transmitted
– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
7. 'PTY' function (PROGRAM TYPE)
PTY MUSIC ---- PTY SPEECH ---- PTY OFF
While selecting PTY type, its selection is impremented by preset buttons as described
in preset key. When PTY is selected, the radio starts to search corresponding PTY
information, and stops if the corresponding PTY information, is detected.
8. + 10 BUTTON (CD / USB MP3)
Press this button to skip 10 tracks each time up of CD / USB MP3
English
9
10

9. MODE BUTTON (MODE)

10. BAND BUTTON (BAND)
TITLE - SONG - ARTIST - DIRECTORY
11. AUTOMATIC OR MANUAL TUNING (FREQ UP >> OR FREQ DOWN <<)
12. - 10 BUTTON (CD / USB MP3)

15. USB PORT

17. PAUSE BUTTON

18. INTRO BUTTON (MP3 SCAN)

19. REPEAT BUTTON 'REPEAT'

20. RANDOM BUTTON 'SHUFFLE'

English
By pressing this key, user can select.
RADIO / USB /AUX-IN / PHONE / CD mode.
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
In CD / USB (MP3) mode, when this key is pressed it is operated as the conversion of
each display mode as follow:
(A) RADIO MODE
When pressed short, these keys are operated as MANUAL tuning mode.
When pressed longer than 1 sec., they are operated as SEEK tuning mode.
(B) USB-CD / MP3 PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
Press this button to skip 10 tracks each time back of CD / USB MP3
During "PLAY", press (17) 'PAUSE' button to "PAUSE". Press it again to resume play.
When this button is pressed, 'SCN' indication is displayed and the first several seconds
of each track of the disc are played. Press again to stop intro and listen to track.
When this button is pressed, 'RPT' indication is displayed and play of the selected track
will be continually repeated until the Track repeat mode is cancelled by pressing 'RPT'
button again.
When this button is pressed, 'SHF' indication is displayed and each track of the disc are
played in random instead of normal progression. To cancel RANDOM mode, press
'SHF' button (20) again.

Publicité

Table des Matières
loading

Table des Matières