Onkyo SBT-200 Manuel D'instructions page 17

Listening to Bluetooth enabled devices
About Bluetooth technology
■
Bluetooth wireless technology is a short-range
wireless technology that enables wireless data
communication between digital devices. Bluetooth
wireless technology operates within a range of
about 10 meters. You do not need to use a cable
for connection, nor is it necessary for the devices
to face one another, such is the case with infrared
technology.
Communication System and Bluetooth Profile
of the sound bar
There are many available Bluetooth Profiles
describing the basic communication methods,
specific functions and uses, to enable
communication between devices.
Communication Bluetooth Specification
System version 2.1
Bluetooth+Enhanced Data
Rate(EDR)
• A2DP 1.2(Advanced Audio
Profile
• AVRCP 1.0(Audio Video
• A2DP enables audio streaming from an A2DP
equipped Bluetooth enabled devices (eg mobile
phone) to the sound bar. By converting wireless
stereo audio signal to analogue audio signal,
you can enjoy listening to the sound through
this speaker system.
• AVRCP (Audio/Video Remote Control Profile) is
a technology that allows a single remote control
to control all Bluetooth enabled audio video
equipment to which a user has access.
Notes when using the sound bar with a mobile
phone
• The sound bar cannot be used to talk over
the telephone even when there is a Bluetooth
connection made to a mobile phone.
• Please refer to the instruction manual of the
mobile phone for details on operation of your
mobile phone while transmitting the sound using
a Bluetooth connection.
Distribution Profile)
Remote Control Profile)
Audio stream
Bluetooth mobile phone or other
Bluetooth enabled devices
Pairing Bluetooth enabled devices
■
Bluetooth enabled devices need to be initially
paired first before they can exchange data. Once
paired, it is not necessary to pair them again
unless:
• pairing is made with more than 8 devices.
(Pairing can only be made one device at a time.
The sound bar can be paired to a maximum of
8 devices. If subsequent device is paired, the
oldest device connected, will be deleted and
replaced with the new one.)
• this sound bar is reset.
(All pairing information is deleted when sound
bar is reset.)
• pairing information is deleted while repairing,
etc.
PAIRING indicator (Blue)
■
Unconnected
Pairing mode
Connected
Near Field Communication (NFC)
■
Near Field Communication (NFC) is a short-
range wireless connectivity technology that
enables two-way interactions between electronic
devices such as smart phones or IC tags only by
holding the device over (or touching) NFC-mark
or the like. The sound bar supports Bluetooth
pairing using NFC.
En-17
Flashes
Flashes quickly
Lights up