Annexe Ehomologations; Informations Pour L'ue - FCI ST100 Série Manuel D'installation, D'utilisation Et De Maintenance

De la massique thermique
Table des Matières

Publicité

Débitmètre série ST100
ANNEXE E
HOMOLOGATIONS

Informations pour l'UE

EU DECLARATION OF CONFORMITY ST100 SERIES
We, Fluid Components International LLC, located at 1755 La Costa Meadows Drive, San Marcos, California
92078-5115 USA, declare under our sole responsibility that the ST100 Flowmeter Product Family, to which
this declaration relates, is in conformity with the following directives and specifications.
Directive 2014/34/EU ATEX
IECEx Scheme
Certified by FM Approvals LLC, NB Code 1725: 1151 Boston-Providence Turnpike, Norwood, MA 02062, USA
EC-Type Examination Certificates:
FM12ATEX0016X satisfies EN 60079-0: 2012 +A11:2013, EN 60079-1: 2014, EN 60079-31: 2014, EN 60529
1991+A1:2000 requirements for use in hazardous areas.
Hazardous Areas Approval FM12ATEX0016X / IECEx FMG 12 0003X for:
II 2 G Ex db IIC T6...T1 Gb Ta = -40ºC to +60ºC
II 2 D Ex tb IIIC T85ºC...T450ºC Db Ta = -40ºC to +60ºC; IP67
Directive 2014/30/EU Electromagnetic Compatibility EMC
Immunity specification: EN 61000-6-2: 2005
Emissions specification: EN 61000-6-4: 2007, +A1: 2011
Directive 2014/35/EU Low Voltage
Electrical Safety Specification: EN 61010-1: 2010 +C1: 2011 + C2: 2013
Directive 2014/68/EU Pressure Equipment (PED)
The ST100 (Insertion Style) models do not have a pressure bearing housing and are therefore not
considered as pressure equipment by themselves according to article 2, paragraph 5.
The ST100L (In-line Style) models are in conformity with Sound Engineering Practices as defined in the
Pressure Equipment Directive (PED) 2014/68/EU article 4, paragraph 3.
Directive 2011/65/EU RoHS 2
The ST100 Product Family is in conformity with Directive 2011/65/EU of the European Parliament and
of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
Issued at San Marcos, California USA
July 2017
______________________________________
Manuel Liong, Qualifications Engineer
1755 La Costa Meadows Drive, San Marcos, California 92078 USA 760-744-6950  800-854-1993  760-736-6250
European Office: Persephonestraat 3-01 5047 TTTilburg – The Netherlands – Phone 31-13-5159989  Fax 31-13-5799036
Doc no. 23EN000024J
Fluid Components International LLC
Manuel Liong Jr
2017.07.06 08:35:25 -07'00'
Flow/Liquid Level/Temperature Instrumentation
Visit FCI on the Worldwide Web:
www.fluidcomponents.com
ANNEXE E – HOMOLOGATIONS
83

Publicité

Table des Matières
loading

Table des Matières