Fizz Creations Make Your Own Tech Desktop Arcade Mode D'emploi page 3

Cardboard Housing
Main Body
Housing (9)
Battery Opening
and Lock (10)
GB: WARNING! This is not a toy.
BATTERY INSTRUCTIONS:
Requires 3 X AAA, 1.5V batteries (not included)
HOW TO INSERT BATTERIES.
Unscrew the battery cover using a screwdriver. Insert fresh batteries following the polarity marked on the product. Replace the cover and secure
with a screwdriver. Different types of batteries (i.e.Alkaline and Zinc) or new and used batteries not to be mixed. Only batteries of the same
equivalent type as recommended are to be used.
Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. If using rechargeable batteries,
charge under adult supervision and remove before charging. Non rechargeable batteries are not to be recharged. Rechargeable batteries are to
be removed from the toy before being charged. The supply terminals are not to be short-circuited. Do not throw batteries into a fire. Batteries
should never be left in the product when not in use for a long period of time. For indoor use only.
WEEE product should be disposed of by handing it over at a designated collection point. For more information about where you can drop off your
waste product for recycling please contact your local authority. Retain packaging for future reference.
3