Fizz Creations Make Your Own Tech Desktop Arcade Mode D'emploi page 2

MAKING YOUR OWN
DESKTOP ARCADE
This product includes everything you need to
make your own Desktop Arcade!
Follow the instructions and you'll have made
your own Desktop Arcade in no time! You
will need to use the double-sided tape &
connecting pegs to hold together the card
nets and the tech within. Closely follow the
step by step guide and use the reference key
to ensure it is completed successfully.
Attaching Components
Double Connecting
Sided Tape Pegs x 8
(1)
Electrical Components
Controller
You will need:
3 x AAA Batteries
(not included)
(2)
Start Coin
Slot (4)
Dial
Gamer LCD Screen
(3)
Top Tip!
Before you start it helps to fold along
the crease lines to further define the
shape – this makes it much easier
further down the line!
If one layer of double sided tape
comes unstuck. Apply another strip
to the other side of the card so you
are sticking tape to tape. This will
ensure it is held together.
On/Off Button
(6)
Controller
(5)
2
GB
Start
Coin (8)
Dial
(7)