emerio AC-125112.1 Mode D'emploi page 5

AC-125112.1
PARTS DESCRIPTION
The device consists of the following main components:
1. Control panel
2. Digital display
3. Air outlet
4. Water level window
5. Water tank
6. Water tank lock
7. Dust filter
8. Cooling pad
9. Remote control
10. Ice packs
a. ON/OFF button
b. Swing button
c. Speed selection button
d. Cooling button
e. Wind mode selection button
f. Timer setting button
BEFORE USE
1. Pull the appliance out from the carton and place it on a solid heat-resistant horizontal surface.
2. Check if the accessories are complete including: one remote control, two ice packs.
HOW TO USE
1. Turn the water tank lock to the horizontal position. Pull out the water tank and add water into the water
tank. If you need the air sent out much cooler, put the ice pack(s) (add water into the ice pack and frozen
first; do not exceed the MAX line on the ice pack when adding water into it) into the water. Make sure the
water level is between the MIN and MAX line marked on the water tank.
2. Plug the appliance into the appropriate power outlet. A beep sound sent out indicates the power is
connected.
3. Turn on the appliance by pressing the ON/OFF button. The logo "
appliance is sending out air flow. To turn the appliance off, just press the ON/OFF button again.
4. Choose and set below functions as you want.

Air flow speed selection:
Press the speed selection button to choose air flow speed, the corresponding speed level logo will be
Water
- 4 -
" is also displayed to indicate the
EN