Beha-Amprobe AT-6010-EUR Mode D'emploi page 13

2. KIT COMPONENTS
2.3 CT-400-EUR Signal Clamp
(optional accessory for the AT-6010-EUR)
The Signal Clamp accessory is used for applications when where is no access to the bare
conductors. The clamp attachment enables the Transmitter to induce a signal through the
insulation into either wires. The clamp works on low impedance closed circuits.
JAW
TACTILE
BARRIER
JAW
RELEASE
TEST LEAD
Figure 2.3: Overview of CT-400-EUR Signal Clamp
9
CONNECTORS TO
TRANSMITTER