Télécharger Imprimer la page

Step2 4143 Mode D'emploi page 7

Publicité

MINIMUM CLEARANCE ZONE
01
01
6 feet
6 feet
(1,8 m)
(1,8 m)
6 feet
6 feet
(1,8 m)
(1,8 m)
Make sure that there is a 6 feet
(1,8 m) obstacle-free zone
around the product, including
the slide and overhead.
INFLATION SET-UP
02
02
E
Test the blower AC Adapter:
1. Plug GFCI into receptacle.
2. Press reset button.
3. Press test button.
4. Switch Blower Power to ON.
5. Press reset button to use product.
Do not use if the button fails to
disable fan.
WARNING:
If the blower remains ON when the "TEST" button is
pushed, the unit is not working properly. DO NOT
USE THE UNIT. Take the unit to a certified electrician
immediately.
|
ZONE DE DÉGAGEMENT MINIMUM
6 feet
6 feet
(1,8 m)
(1,8 m)
Assurez-vous qu'il y a une zone
sans obstacle de 1,8 m (6 pieds)
autour du produit, y compris la
glissière et le plafond.
|
INSTRUCTIONS DE GONFLAGE
Testez l'adaptateur secteur du ventilateur:
1. Branchez le GFCI dans la prise.
2. Appuyez sur le bouton de réinitialisation.
3. Appuyez sur le bouton de test.
4. Mettez le ventilateur sous tension.
5. Appuyez sur le bouton de réinitialisation pour
utiliser le produit. Ne pas utiliser si le bouton ne
parvient pas à désactiver le ventilateur.
ATTENTION:
Si le ventilateur reste en marche lorsque le bouton «TEST»
est enfoncé, l'unité ne fonctionne pas correctement.
N'UTILISEZ PAS L'APPAREIL. Apportez immédiatement
l'appareil à un électricien agréé.
|
ZONA DE ESPACIO LIBRE MÍNIMO
6 feet
6 feet
(1,8 m)
(1,8 m)
6 feet
6 feet
(1,8 m)
(1,8 m)
Asegúrese de que haya una zona
libre de obstáculos de 1,8 m (6
pies) alrededor del producto,
incluidos el tobogán y el techo.
|
INSTRUCCIONES DE INFLACIÓN
E
Pruebe el adaptador de CA del soplador:
1. Enchufe el GFCI en el receptáculo.
2. Presione el botón de reinicio.
3. Presione el botón de prueba.
4. Encienda el ventilador.
5. Presione el botón de reinicio para usar el
producto. No lo use si el botón no logra
desactivar el ventilador.
6 feet
6 feet
(1,8 m)
(1,8 m)
ADVERTENCIA:
Si el ventilador permanece ENCENDIDO cuando se
presiona el botón "TEST", la unidad no está funcionando
correctamente. NO USE LA UNIDAD. Lleve la unidad a
un electricista certificado inmediatamente.
6 feet
6 feet
(1,8 m)
(1,8 m)
7

Publicité

loading