Assembling The Vacuum; Attaching The Wand And Floor Nozzles - Simplicity VACUUMS S65S Manuel Du Propriétaire

ASSEMBLING THE VACUUM

Attaching the Wand and
Floor Nozzles
NOTE: Do not operate the vacuum
until it is completely assembled.
The vacuum, floor nozzles, wand and
accessories are packed separately.
1. Connect the male end of the metal
wand to the vacuum (Fig. 1).
2. Connect the female end of the metal
wand to either floor nozzle or tools
as required (Fig. 2).
3. Place the other tools on the Storage/
Charging Station (Fig. 3).
4
Fig. 1
Fig. 2
Fig. 3