Problem Solving Guide; Troubleshooting; How To Contact Your Authorized Retailer; Key Replacement Parts - Simplicity VACUUMS S65S Manuel Du Propriétaire

PROBLEM SOLVING GUIDE

Troubleshooting

WARNING! To reduce the risk of electrical shock or injury from moving parts, turn off
the vacuum and remove battery before servicing or cleaning.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with
wet hands.
PROBLEM
Vacuum will
not operate
Vacuum will
not pick-up
dirt or suction
power
is weak
Brushroll does
not turn
Dirt escaping
from vacuum

How to Contact Your Authorized Retailer

Any other service should be performed by an Authorized Retailer. To locate your
nearest Authorized Retailer, visit SimplicityVac.com or call 888-974-6759.

Key Replacement Parts

• Genuine HEPA Media Filter: SF65

For Best Performance

• Keep machine and all accessories clean and in good operating condition.
• Empty dust cup frequently and clean or replace the filter routinely.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Simplicity Vacuum filtration products are
designed for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner's manual.
14
CHECK POINT
Battery charge
Battery installation
Vacuum, wand and floor
nozzle connection
Full or clogged dust cup
Worn brushroll
Clogged floor nozzle
Clogged wand
Wand not inserted fully
to vacuum
Dirty Filter
Brushroll
Full or clogged dust cup
Filter not installed
correctly
Puncture in filter
POSSIBLE SOLUTION
Charge the battery
Install battery correctly
Assemble wand and floor nozzle
correctly to vacuum
Empty dust cup
Replace brushroll
Check for clogs
Check for clogs
Insert wand fully to vacuum
Replace filter
Clean the brushroll
Empty dust cup
Install filter correctly
Replace filter