Lionelo Sander Manuel De L'utilisateur page 10

2.
It fits vehicles with positions approved as ISOFIX positions (according to
the vehicle's instruction manual) depending on the child seat category and
attachment.
3.
Weight group and ISOFIX size class for which the device is intended: 0+,
size class E.
Dear Customer!
In case of any questions or comments on the purchased product, please contact
us: help@lionelo.com
Before you start using this seat, please read the user manual carefully. Improper
use may lead to a serious threat to the life of your child.
Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland
Proper and improper installation of the safety seat (fig 2):
Wrong position
May be used with three point belt system
Can only be mounted when three point belt system is present
Warnings:
• The hard parts and plastic parts of the child restraint must be placed and
installed in such a way that, under normal conditions of use of the vehicle,
they cannot be trapped by the sliding seat or door of the vehicle.
• For rear-facing installations: do not install the device on seats fitted with airbags.
• The rearward-facing restraint can only be installed if the child's weight is less than 9 kg.
• All straps for securing the restraint to the vehicle must be tight, straps for restraining
the child must be adapted to the body structure, the straps must not be twisted.
• Make sure the lap belts run low so that the pelvis is held firmly.
• If the device was subjected to heavy loads during an accident, it must be replaced.
• Do not make any modifications to the seat or install any additional components
without the consent of the competent authorities. Non-compliance with the
instructions provided by the manufacturer may endanger the user.
EN ‑ 10 ‑