PROGRAMMING WITH THE EASY BASE UNIT
After creating the required function the actuator's operating parameters can be set from
the "Application ¡ Parameters" menu.
The parameters available, in relation to the function created, are listed in the following
table.
The underlined value is the default value.
Function: For all functions
Parameter: Operation mode
shutters
blinds
Function: alarm
Parameter: Alarm mode
No alarm
Alarm pos.: DOWN
Alarm pos.: UP
Configuration parameters (Easy)
Handling of Shutters
Handling of blinds and regulation of laths
Alarm signal ignored
Complete raising of the shutters
Complete closure of the shutters
22