Kohler K-175 Guide D'installation page 8

Pencil
Mark
3. Install the Mounting Brackets
Align the point of the bracket with the marked locations on the studs.
Hammer one end of the bracket into the stud until the point is embedded.
Level the bracket horizontally and repeat the steps to secure the other end of the bracket to the
opposite stud.
Secure the ends of the bracket using the supplied screws.
Repeat steps to install the second bracket in the stud cavity.
1093174-2-C
20-1/2" (52.1 cm)
Align the brackets
with the pencil mark.
Pencil
Mark
8 Kohler Co.