Janome 1210DX Livret D'instructions page 72

Table des Matières

Publicité

q
e
r
w
q
e
!1
o
!0
r
w
Needle/Lower looper thread tension is out of
balance (2)
The illustration shows sewing results when the needle
thread tension is too tight and/or lower looper thread
tension is too loose.
Remedy:
Loosen needle thread tension and/or tighten lower looper
thread tension.
o Left needle thread tension dial
!0 Right needle thread tension dial
!1 Lower looper thread tension dial
Correct tension for rolled hem
* The illustration shows sewing result with correct tension
settings.
Set the changeable thread guide at the lowered position.
Other settings are same as the 3-threads rolled hem (See
page 76).
However, tension adjustment may be required depending
on the type and thickness of fabric and threads being
used.
Make a trial sewing with the fabric and threads you wish to
use to obtain in the best results by adjusting tension.
q Wrong side of fabric
w Right side of fabric
e Needle thread
r Lower looper thread
70

Publicité

Table des Matières
loading

Table des Matières