Wagan Tech Elite 700W PRO Guide D'utilisation page 9

PROBLEM: No Output Voltage – No LEDs Lit
Reason
Blown fuse.
PROBLEM: Inverter Auto Shut Down – Fault LED Lit
Reason
Battery voltage is below 9.5 volts.
Inverter is too hot (thermal shut down
mode).
PROBLEM: Inverter Shut Down – Fault LED Lit
Reason
Equipment being operated draws too
much power.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2013 Wagan Corporation. All Rights Reserved.
Solution
Check fuse. If the fuse is blown,
replace with the same type and
rating fuse.
Solution
Charge or replace battery.
Allow inverter to cool.
Check for adequate ventilation.
Reduce the load on the inverter to
the specified TrueRated
output.
Solution
Do not use the equipment with
this inverter; use a higher wattage
inverter.
power max
™
8